See it SAFE MAX Surgical Gown

$69.99$89.99

Our See it SAFE MAX Surgical Gown is the No.1 reusable surgical gown.  It is Lightweight, antimicrobial, anti-static, breathable and highly fluid repellent.  Exclusive to Performance Fabrics Pty Ltd.

It is an AAMI Level 3 and BS EN 13795 reusable surgical gown.

We have stock of the Large size in Ciel blue, but can make Small and XL to order – (minimum 6 gowns per size).

All See it SAFE gowns are permanently antimicrobial, antibacterial, fluid repellent, minimal-lint and washable.

The fabrics contain NO HARMFUL CHEMICALS, as certified by the OEKO-TEX 100 Standard.


Our exclusive See it SAFE Surgical Gowns are also available in other options which you can see on our products page. I.E.  ‘Breathe-Easy’
See it SAFE Breathe-Easy Surgical Gown and ‘Max teal green’ See it SAFE MAX Surgical Gown The No.1 reusable gown

The See it SAFE MAX washable, antimicrobial and fluid repellent gown has highly fluid repellent (85cm) front, sleeves and back panels.
It is an AAMI Level 3 reusable surgical gown.
See it SAFE MAX Surgical gown reusable
See it SAFE MAX Surgical gown reusable
AAMI Level 3 gowns provide an enhanced barrier of protection against dangerous liquid and workplace hazards.
This PPE is ideal safety wear for the widest range of surgical procedures, and in hazardous industrial areas, where the risk of fluid exposure is moderate.
N.B. Lint can be a major cause of airborne infection, and many cheaper disposable gowns produce large amounts of lint which is unacceptable when treating open wounds.
See it SAFE fabric was developed to exceed the minimal lint requirements of European Standards in the early 2000’s when it was first produced, and continues to exceed worldwide standards for fluid repellency, minimal-lint, tear strength, thermal and wash stability, etc.


This means they can be used and washed at least 75 times and often up to 120 times
before their fluid repellency reduces to a level below either the AAMI Level 3 Standard (50cm), the EN Standard (20cm),  or the level you require for your particular use.

The antimicrobial efficacy of the fabric is barely effected by commercial laundering and has been tested to 280 cycles with negligible effect on its properties.


The cuffs are made from 100% polyester with 2 x stretch, and dry out very quickly when washed. N.B. Almost all our competitors’ gowns have poly/cotton cuffs which take a lot longer to dry out, causing backlogs in the laundering process. Ours do not and will dry quickly during normal tumble drying or line drying.

The gown has 2 or 4 ties at the back of the neck and 2 ties at the inside right side seam at waist level, plus 2 ties at the outside left seam at waist level.

Lastly, our gowns are checked at each stage of manufacturing:

1. The fabric is tested before it leaves the weaving mill for fluid repellency, and exceeds all relevant world standards such as AS, ANZ, EN and ISO for its category of use AAMI level  3.

2. The fabric is inspected over light tables for flaws, and evenness before it leaves the weaving mill.

3. When laying up the fabric for cutting, any fabric faults are cut out.

4. The gown stitching and finishing is inspected at 3 stages during production to ensure only the highest quality product is sent to our customers.

SKU: N/A Category: Tags: , ,

Our See it SAFE MAX Surgical Gown is the No.1 reusable surgical gown.  It is Lightweight, antimicrobial, anti-static, breathable and highly fluid repellent.  Exclusive to Performance Fabrics Pty Ltd.

It is an AAMI Level 3 and BS EN 13795 reusable surgical gown.

We have stock of the Large size in Ciel blue, but can make Small and XL to order – (minimum 6 gowns per size).

All See it SAFE gowns are permanently antimicrobial, antibacterial, fluid repellent, minimal-lint and washable.

The fabrics contain NO HARMFUL CHEMICALS, as certified by the OEKO-TEX 100 Standard.


Our exclusive See it SAFE Surgical Gowns are also available in other options which you can see on our products page. I.E.  ‘Breathe-Easy’
See it SAFE Breathe-Easy Surgical Gown and ‘Max teal green’ See it SAFE MAX Surgical Gown The No.1 reusable gown

The See it SAFE MAX washable, antimicrobial and fluid repellent gown has highly fluid repellent (85cm) front, sleeves and back panels.
It is an AAMI Level 3 and BS EN 13795 reusable surgical gown.
See it SAFE MAX Surgical gown reusable
See it SAFE MAX Surgical gown reusable
AAMI Level 3 gowns provide an enhanced barrier of protection against dangerous liquid and workplace hazards.
This PPE is ideal safety wear for the widest range of surgical procedures, and in hazardous industrial areas, where the risk of fluid exposure is moderate.
N.B. Lint can be a major cause of airborne infection, and many cheaper disposable gowns produce large amounts of lint which is unacceptable when treating open wounds.
See it SAFE fabric was developed to exceed the minimal lint requirements of European Standards in the early 2000’s when it was first produced, and continues to exceed worldwide standards for fluid repellency, minimal-lint, tear strength, thermal and wash stability, etc.


This means they can be used and washed at least 75 times and often up to 120 times
before their fluid repellency reduces to a level below either the AAMI Level 3 Standard (50cm), the EN Standard (20cm),  or the level you require for your particular use.

The antimicrobial efficacy of the fabric is barely effected by commercial laundering and has been tested to 280 cycles with negligible effect on its properties.


The cuffs are made from 100% polyester with 2 x stretch, and dry out very quickly when washed. N.B. Almost all our competitors’ gowns have poly/cotton cuffs which take a lot longer to dry out, causing backlogs in the laundering process. Ours do not and will dry quickly during normal tumble drying or line drying.

The gown has 2 or 4 ties at the back of the neck and 2 ties at the inside right side seam at waist level, plus 2 ties at the outside left seam at waist level.

Lastly, our gowns are checked at each stage of manufacturing:

1. The fabric is tested before it leaves the weaving mill for fluid repellency, and exceeds all relevant world standards such as AS, ANZ, EN and ISO for its category of use AAMI level  3.

2. The fabric is inspected over light tables for flaws, and evenness before it leaves the weaving mill.

3. When laying up the fabric for cutting, any fabric faults are cut out.

4. The gown stitching and finishing is inspected at 3 stages during production to ensure only the highest quality product is sent to our customers.

Weight 0.3 kg
Dimensions 22 × 18 × 3 cm
Size

S, L, 2XL

Shopping Cart